Density measurement in the tunneling industry

The first aspect of tunneling is to drill a sewer. The cutter head is filled with a slurry (suspension of Bentonite/clay and water) which applies hydrostatic pressure on the excavation face.

During drilling, ‘clean mud’ (water with Bentonite) is pumped from the clean mud tank into the drilling pipe and comes out at the drilling head. The ‘dirt mud’ comes back in the drilling well (starting point). When the drilling well is almost full, it will be pumped into the Recovery Unit (RU) where the operators optimize the recovery of the Bentonite. Bentonite is absorbing sand particles, therefore the slurry can flow easily with water. One Bentonite particle can be recovered five times.

By controlling the wt% solids, the operator is able to optimize the recovery of the Bentonite.

The SDM (Slurry Density Meter) is perfectly suitable for this application. Also, this non-nuclear SDM is a sustainable, non-hazardous solution.

For more information about Rhosonics, please take a look on our LinkedIn, Instagram or Twitter page. For questions, you can contact us directly or take a look on this page to get in touch with your local distributor.

Back to overview

Receive our technical update?

Fill in your name and email address and we’ll keep you in the loop on our latest technology updates.